BMW SSS & OPS 
On vehicle models from the E65 on, BMW is for the first time using fibre-optic cables as standard for communication between control units.The optical buses are notable for their high data transmission rate and they are not susceptible to electromagnetic interference. The optical buses in question are the MOST bus, primarily used for in-car entertainment electronics, and the byteflight  bus, which  serves  predominantly safety-critical functions.

OPPS has been designed for encoding, individualising and programming (CIP) via the Software Service Station (SSS) and envisaged for use as part of the BMW diagnostic system (DIS)  from DISPlus and Group Tester One (GT1). It is intended for testing and programming tasks from the E65 series, taking the place of the diagnostic head.  
                                     
OPS is intended for rapid programming of control units.When operated at the SSS, no diagnostic or technical measuring pro-cedures are possible, as no measuring technology is incorporated; in this  instance, OPPS  / OPS  is  used  predominantly  for  programming control units (flashing)munication with the vehicle can be performed both via the MOST and via the OBD interface. The OBD interface is required for the power supply to the OPPS / OPS and has communication properties via which the vehicle can be identified and the data to be programmed can be determined. From CIP version 7.0, it is possible to delete fault code memories via OPPS / OPS. 

Standard Configuration: 
1. OPS multiplexer
2. OBD-II diagnostic cable
3. LAN cable 
4. OPS MOST cable 
5. HDD with preinstalled SSS V34 for IBM T30 
6. HDD with preinstalled DIS V57 for IBM T30

The Tech-2 
is the same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2010.

Tech-2 Flash Tester 

32 MB PCMCIA Card with GM OE Applications 
CAN diagnostic interface module(CANdi) and instruction sheet download ( 199.2 kb ) 
Data/Sensor/Trouble Code Manual 
DLC Cable, DLC Loopback Adapter 
12V Cigarette Lighter Power Cable 
SAE 16/19 Adapter 
NAO 12/19 Adapter 
Battery Power Cable 
Storage Case 

 Jenny
Heymycar Technology Co.,Ltd
Mobile :0086-15818589682

NISSAN consult-4
1.Scantool Diagnostics for all Nissan,Infiniti and newest Renault 
2.NO Reprogramming for all Nissan,Infiniti and newest Renault
3.NO Immobi and Smart key for all Nissan,Infiniti and newest Renault
4n not supports GTR
Product Information: 
NISSAN consult-4 Software Version: 
1.NISSAN consult-4 software version : Ver 09.17.01.01.00
NISSAN consult-4 supports 11 language
1. English    2. Finnish   3. French    4. German    5. Greek  6. Italian  7. Japanese   
8. Spanish   9. Chinese(Traditional)   10. Chinese(Simplified)   11. Russian
Jenny
Heymycar Technology Co.,Ltd

Features and Specifications
Nissan Motor Co. Ltd. has released the CONSULT-III, (*1) a hand-held diagnostic testing equipment for servicing Nissan in-vehicle electronic systems, with the aim of realising swift and accurate diagnosis and repairs at Nissan dealerships worldwide. The diagnostic tester will be introduced at Nissan dealerships in Japan and other global markets. The progressive launch of the new system will coincide with the release of the new Skyline sedan in Japan in late 2006, and other global markets which sell the Infiniti G35.   Subsequently, the Consult III will be progressively introduced to all of the remaining markets as the next generation of Nissan vehicles are released.
 
The timely and precise diagnosis of a vehicle??s problem has become increasingly complex as more intricate electronic hardware is an intrinsic part of new vehicles.  There has also been a remarkable increase in the number of computers connected to the vehicle's Controller Area Network (CAN). In the past 5 years, the number of computer systems installed in modern vehicles has doubled from only 8 or so in 2001. The CONSULT-III has been designed to address these complex and advanced in-vehicle electronic devices, maximising diagnostic precision, improving repair time and quality and futher reducing service times and costs for Nissan customers..
 
The basic diagnostic system is composed of the main unit which is housed in a durable and rugged laptop PC, a wireless vehicle communication interface and wireless measurement interface; the laptop PC and each interface is connected via Bluetooth technology. Through a wireless LAN, this diagnostic system can be connected to the Nissan network in Japan, enabling the dealerships to retrieve information from various sources and display service technology data on the laptop PC.


LANGUAGE:
1, English,
2, Finnish,
3, French,
4, German,
5, Greek,
6, Italian,
7, Japanese,
8, Spanish,
9, Chinese(Traditional),
10, Chinese(simplified),
11, Russian.

Description:
NEW UPDATED TRUCKS: ERF,  BREMACH, ASTRA (2011-03-09)Information about PS2 heavy duty
(1) SUPPORTS  BOTH BLUETOOTH AND DIRECT PLUGIN DIAGNOSIS;
(2) SUPPORTS OVER 10 KINDS OF DIESEL TRUCK MODELS, INCLUDE VOLVO, SCANIA, MAN, MERCEDES BENZ, ISUZU, MACK, CUMMINS, HINO, DAF, HYUNDAI,  IVECO, FUSO,ERF,ASTRA, BREMACH ETC; 
(3) FUTURE UPDATES: NISSAN UD, RENAULT,SINOTRUCK. ALL COMING SOON ! 
(4) A DETAILED FUNCTION LIST CAN BE DOWNLOADED HERE
(5 ) ALTERNATIVELY, YOU MAY ASK ONE OF OUR SALES TEAM MEMBERS

Description: 
Clip's main menu allows you to:
• see all the information relating to the vehicle 
• look at the function you want to use:- computer test
- automatic test of all computers
- reprogramming
- airbag test
- scantool (OBD tests)
- Base Doc (access to Technical Notes)
- physical measurements
- antipollution
- multimeter

Renault CAN Clip set includes :
• CAN Clip Interface 
• 2 cables for CAN Clip <-> Car connection 
• 1 cable for CAN Clip <-> PC connection 
• 1 software CD (CLIP V96, can be installed on ANY PC)

It's very simple to diagnose a vehicle using Renault CAN Clip Diagnostic Interface: just select the vehicle make, enter the V.I.N. and press ENTER.

 Jenny