Search    Home | Register | Login | Join | Trade | Forum | Cart

  < Back


     About this company : HEBEI TONGCHAN was set up in 1974, is a producer and supplier of various kinds of Valves, Steel Pipe Fittings, Steel Flanges and Rubber Expansion Joints. It is the predecessor of a state-owned corporation, through decades of hard work, the company has obtained a top-rated reputation in its field. At present, Hebei Tongchan's import / export volume exceeds 120 million US dollars annually. Hebei Tongchan has obtained the ISO9001:2000 & CE certificates. Hebei Tongchan's primary areas of production include: * Butterfly Valves, Ball valves, Gate Valves, Globe Valves, Check Valves, other valves and Y-strainer * Forged Steel Flanges / Cast Steel Flanges * Carbon Steel Butt-Welded Pipe Fittings / Stainless Steel Butt-welding PIpe Fittings * Forged Steel High Pressure Pipe Fittings * Cast Stainless Steel Threaded Fittings * Steel Nipples, King Nipples, and Steel Sockets * Flexible Expansion Rubber Joints Hebei Tongchan's products can be found in more than 100 countries and regions all over the world, and the company has become an OEM for many renowned international companies. Hebei Tongchan is committed to becoming the best flow control service provider in China

     Contact : Haihua Lu 
     Headquarters : No.486 West Heping Road, Shijiazhuang, Hebei, 050071, China
     Phone : 0086 311 87832177, Fax : 0086 311 87060680 
     Website : Log on to trade instantly , Email : Log on to trade instantly

     FC gate valve FC gate valve

Forged steel FC gate valve (full bore) with non-rising stem
Design and test: API6A
Sizes: 1 13/16 to 4 1/16 inches
Working pressures: 5,000 to 10,000psi
Material class: DD, EE and FF to NACE MR-0-75
Connection ends type: flanged and threaded end

  > Add to cart

     Butterfly Valves Butterfly Valves

Wafer Type Butterfly Valve
Complies with MSS SP-67, BS5155, and API 609 standards
Compatible with ANSI, DIN, BS, and JIS flanges
Sizes: handles (1 inch to 12 inches) and manual gear operators (1 inch to 48 inches)
Pressure: PN0.6MPa to PN1.6MPa
Temperature ratings: -35C to 135C
Connection: wafer type, lug type, and U-section wafer type

    Body materials: cast iron or ductile iron
    Disc: ductile iron (with nickel-plated or nylon-coated), SS 304, 304L, 316, 316L, aluminum bronze
    Seat: NBR, EPDM, neoprene, PTFE, and Viton
    Shaft: SS316, SS410, and SS416
    Pin: SS316, SS410, and SS416
    O-ring: NBR, EPDM, neoprene, and Viton
    Bushing: PTFE, nylon, and lubricated bronze

  > Add to cart

     Cast steel valves Cast steel valves

Cast Carbon Steel / Stainless Steel Valves, Flange End to API standard
Range: Gate Valve, Check Valve, Global Valve, Ball Valve etc.
Rating: 150LBS, 300LBS, 600LBS
Size range: DN 40 - DN 600.
Material: BODY:ASTM A216 WCB, ASTM A351 CF8, CF8M, CF3, CF3M; TRIM: 13 CR.

  > Add to cart


With non-rising stem, flange end and resilient seat
Meets DIN3352-F4 and F5 standards
Sizes: 1.5 to 24 inches
Nominal pressures: PN10 and PN16
Face-to-face dimensions: DIN3352-F4 and F5
Flange drilled: DIN2501
Body/bonnet: cast or ductile iron
Wedge: ductile iron lined with EPDM/NBR rubber
Stem: stainless steel or brass
Bolt and nut: stainless or carbon steels with zinc plating
Other options:

    Design according to ANSI/AWWA C509 or BS 5
    Flange drilling to ANSI B16.1/ANSI B16.5, BS 4504
    Metal seal type

  > Add to cart

     Forged Steel Fixed Ball Valve Forged Steel Fixed Ball Valve

Forged steel fixed ball valve (three pieces)
ANSI class 150, 300, 400, 600, 900, 1,500 and 2,500
Sizes: 2 to 40 inches
Meets API 6D, API 608, ANSI B16.34 and BS 5351 standards
Face-to-face dimensions: ANSI B16.10 and API 6D
RF and RTJ flange ends: ANSI B16.5, MSS SP44 and API605
Butt-welding ends: ANSI B16.25
Test: API 6D or API 598

    Body/bonnet: A105, 304, 316, 304L and 316L
    Ball: A105 + HCr (Nip), 2Cr13, 304, 316, 304L and 316L
    Stem: 2Cr13, 304, 316, 304L and 316L
    Seat: PTFE, PPL and nylon 101

  > Add to cart

     forged steel valves forged steel valves

Range: gate valves, globe valves, check valve, Y-type globe valves, and Y-type check valves Type: flange ends, inner screwed ends, and socket welding Class: 150 to 600lbs, 900 to 1,500lbs, and 2,500lbs Design: ASME/ANSI B16.34, API 600, and API 602 Ends connection: Flange dimension: ASME/ANSI B16.5 (RF) SW dimension: ANSI B16.11 Screwed dimension: ANSI B16.20 BW dimension: ANSI B16.25 Structural feature: Bolt bonnet (BB), outside screwed, and yoke (OS and Y) Welded bonnet (WB), outside screwed, and yoke (OS and Y) Pressure-in bonnet (PS), outside screwed, and yoke (OS and Y) Body material: A105, F304, F304L, F316, and F316L Inspection and test: API 598, API6D, CE, and ISO9001

  > Add to cart


Cast Iron / Ductile Iron Valves, Flange End

Range: Gate Valve, Check Valve, Global Valve, Y-Strainer and other valves.
Type: Resilient Seat / Metal Seated; Non Rising Stem / Rising Stem O.S.&Y.;
Design standard:
1) Gate Vleve:DIN3352 F4 / F5, BS5, ANSI C509
2) Check Valve: DIN3202 F1 / F6, BS 5153, ANSI CLASS 125 / CLASS 150
3) Global Valve: DIN3202 F1, BS5152, ANSI CLASS 125 / CLASS 150
4) Y-Strainer: DIN 3202 F1, BS2080, ANSI CLASS 125 / CLASS 150
Flange Drling to DIN, ANSI, BS etc.
Size Range: DN40 - DN 600( maximumly)

  > Add to cart

     Rubber expansion joints Rubber expansion joints

Rubber Expansion Joints
Types: Single Sphere, double-sphere; Flange Type, Union Type Flange drilling: ANSI class 125/150, DIN PN 10/PN16, JIS 5K/10K Working pressure: 1.6mPa (16 kgf/cm2) Working degree: -15 to +115 degrees Celsius Working medium: Vapour, compressed air, cold & hot water, seawater, oil, weak acid, alkali Material list: Body: Neoprene, EPDM, NBR Lining: Chinlon Cord Fabrics Frame: Hard Steel Wires Flange: Carbon Steel.

  > Add to cart

     Sell forged steel pipe fitting Sell forged steel pipe fitting

Forged carbon steel  / stainless steel pipe fittings
Design and manufacture: ASME/ANSI B16.11, B 1.20.1, MSS SP-79, 83 and JIS B 2316 Types: Union, 90 degrees Elbow, 45 degrees Elbow, Tee, Cap, Coupling, Nipple, Bushing, Plug and Half-thread Short Pipe Ends: Socket weld and threaded NPT Nominal diameter: NPS 1/8 to 4 inches (DN6 to DN100) Threaded: 2000LB, 3000LB and 6000LB; Socket weld: 3000LB, 6000LB and 9000LB Materials: ASTM A 105, ASTM A 182 F304, F304L, F316 and F316L.

  > Add to cart

     Sell Pipe Fittings Sell Pipe Fittings

Seamless / welded butt-welding pipe fittings, ANSI B16.9
Types: 45 Degree Elbows, 90 Degree Elbows, 180 Degree Returns, Straight Tees, Reducing Tees, Caps, Concentric Reducers and Eccentric Reducers Specification standards: ANSI B16.9, ANSI B16.28; JIS B2311; DIN 2605, 2615, 2616, 2617 Material standards: ASTM A 234 WPB, JIS G3452, DIN 1629, SS304, SS316, SS304L, SS316L Nominal pipe size: 1/2 to 48 inch (DN15 to DN1200) Available Wall Thickness: SCH20, STD, SCH40, XS, SCH80, XXS, etc. (for ANSI); SGP (for JIS) Available painting: Varnish Paint, Black Paint(Carbon Steel).

  > Add to cart

     Stainless Steel Pipe Fittings Stainless Steel Pipe Fittings

Cast stainless steel fittings, threaded end, 150 PSI pressure
Range: elbow 90 / 45, street elbow, tee, reducing tee, cross, union, union m/f, hexagon nipple, reducing hexagon nipple, hexafon bushing, square plug, hexagon plug, cap, hexagon cap, socket banded, reducing socket banded, socket plain, socket o. D. Machined, barrel nipple, hose nipple Size: 1/8" - 4" Material: SS304 / SS316 Pressure: 150PSI Threaded: DIN 2999/ 259, BSPP, BSPT, NPT, NPS.

  > Add to cart

     Steel flanges Steel flanges

Cast / Forged carbon steel / stainless steel flanges
Range: Slip On, Welding Neck, Threaded( Screwed), Blind, Plate, Socket Welding, Lap Joint Flanges Standard: ANSI, DIN, BS, JIS, UNI Rating: 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb, 2500lb, PN10, PN16, PN25, PN40, PN64 Material: ASTM A105, ASTM A181, ASTM A182 and ASTM A350 Type: Slip On, Welding Neck, Blind, Threaded, Lap Joint, Socket Weld, Plate Size: NPS 1/2 to 60 inch Facing: RF, FF, RTJ Painting: Black Paint, Varnish Paint, Golden Paint

  > Add to cart

     Steel Nipples and Soclets Steel Nipples and Soclets

Available in various specifications
Type: nipples, king nipples, sockets

    ANSI/ASTM A733, ANSI/ASTM A 120 (SCH40), thread: ANSI B1.20.1
    DIN 2982, steel pipe standard DIN2240, thread: DIN 2999
    BS 1387, steel pipe standard BS 1387(M), thread: ANSI B1.20.1

King nipples:

    BS electrogalvanized
    BS hot galvanized
    ANSI electrogalvanized


    ANSI/ASTM A 120 (SCH40), thread: ANSI B1.20.1 (internal paralleled thread)
    DIN 2986, steel pipe standard DIN2448, thread: DIN 2999 (internal paralleled thread)
    BSEN 10241:2000, steel pipe standard BS 1387 (M), thread: BS 21 (internal paralleled thread

  > Add to cart

     Wafer Check Valve Wafer Check Valve

Complies with API 594 standard
Adopts dual plate design for efficient sealing
Valve inspection and testing, complies with API 598 standard
Available in series F16 and F125
Compatible with DIN and BS flanges
F125 check valve is compatible with ANSI 125/150 flanges
Sizes: 1.5 to 24 inches
Available in wafer type body

    Body materials: cast iron or ductile iron
    Disc: ductile iron (nickel-plated or nylon-coated), SS 304, 304L, 316, 316L and aluminum bronze
    Seat: NBR, EPDM, neoprene, PTFE or Viton
    Shaft: SS304, SS316 and SS410
    Spring: SS304, SS316 and SS410
    Seal washer: NBR, EPDM, neoprene or Viton

  > Add to cart

Page 1 of 1
  ^ Back to top

   Bookmark and Share

About Us | Register | Login | Join | Trade | Forum | Cart |  Join the MarginUp Facebook Page  |  Connect with MarginUp On Linkedin  |  Follow MarginUp on Twitter
Know-How | Trading Precaution | Phishing Alerts | SOAOnDemand! | VAR 360 | RSS Feed 

  Copyright © 2019 MarginUp All Rights Reserved.
MarginUp User Agreement and Privacy Policy.