Tungsten Carbide Blanks of Cold Heading/ Punching /Forging Dies

Tungsten carbide cold heading die for cold punching and heading of screws and nuts.

High impact resistance ,Toughness,wear resistance,and quality consistency. You are encouraged to use our professional carbide grades for cold heading &punching die nibs. Power metallurgical Compacting dies and other industries.For stable performance and high-cost-effectiveness.They have been proved to be ideal in making non-ferrous metal , ferrous metal and their alloys.

Zhuzhou UKO Cemented Carbide Co.,Ltd. could supply various grades and sizes cemented carbide heading die to customer, we have most complete mould stocks, also we could make any sizes as per customer's requirements.

All of our heading dies are sintered by HIP furnace, and we used the excellent raw material, our heading dies was exported to Germany, Italy, Turkey, South east Asia and Japan, the qty of our heading die production is over 20 MT per month, and the quality if very competive.

Tungsten Carbide Blocks / Plates for Moulds /Forming tools

Tungsten Carbide Plate in different specifications according to clients' specific requirements. The surface condition are divided as sintered blank and grinding, which meet different products applications. Following is a drawing showing the tungsten carbide plate we supplied.

Our service:

1/ feedback within 24 hours;

2/ good english communication;

3/ professional suggestion on product;

4/ good traning export sales person;

5/ skilled in tungsten carbide sell.

ZHUZHOU UKO CEMTNED CARBIDE CO.,LTD

Address: Xinhua West Road, Hetang district, Zhuzhou, Hunan, P.Rina  

Postal code: 41200

Tel: +86-731-28339730

Fax: +86-731-28337210

Mobile: +86-15973362017

 GENERAL INTRODUCTION:

Zhuzhou UKO cemented carbide co., ltd. Is contribute to manufacture and sale kinds of tungsten carbide mould, precision tools and blanks, the main products are tungsten carbide ring and rollers, strips, blade, drawing dies , heading dies, rods, precision tools and etc, we own advanced level equipments, such as deoxidization furnace controlled by computer, high temperature Molybdenum carbide furnace, automatic-press sintering furnace,  slow-feeding NC wire-cut machine, precision EDM shaping machine, CNC Machining Center and quality test equipment.

Our company gathered the professional stuff in the area of tungsten carbide design, produce and sales, we could offer an excellent service to the clients.

We had exported our products to more than 20 countries in North America, Europe and South-east Asia. The products had passed the ISO9001-2000 quality system certificate.

We could offer high quality products and excellent service based on the advanced quality control system, good management, market investigate research and service insurance.

 GENERAL INTRODUCTION:

Zhuzhou UKO cemented carbide co., ltd. Is contribute to manufacture and sale kinds of tungsten carbide mould, precision tools and blanks, the main products are tungsten carbide ring and rollers, strips, blade, drawing dies , heading dies, rods, precision tools and etc, we own advanced level equipments, such as deoxidization furnace controlled by computer, high temperature Molybdenum carbide furnace, automatic-press sintering furnace,  slow-feeding NC wire-cut machine, precision EDM shaping machine, CNC Machining Center and quality test equipment.

Our company gathered the professional stuff in the area of tungsten carbide design, produce and sales, we could offer an excellent service to the clients.

We had exported our products to more than 20 countries in North America, Europe and South-east Asia. The products had passed the ISO9001-2000 quality system certificate.

We could offer high quality products and excellent service based on the advanced quality control system, good management, market investigate research and service insurance.

Tungsten carbide rolls for reinforced concrete steel wires 

1/ GENERAL INTRODUCTION:

UKO cold rolling solutions

Advantage in technology and expertise

Thanks to the application of the most modern methods in addition to the use of the best materials available, our employees manufacture products, which define a new standard in wire reduction.

The range of services provided by UKO includes standard and individual customer solutions, and it also includes the reconditioning of used rolls in our grinding centre in addition to the manufacture of rolls. Our specialists will react to your requirements in complete focus and always adapt them to your needs.

Profit with the double benefits of UKO carbide rolls:

• decisive cost advantage through use of the highest in process reliability and roll working life
• increased wire quality through improved surface finishing and rib geometry

UKO will provide service support over the entire operating life of your rolls. Our range of products and services means that we are the only partner you need for safety and increasing your productivity.

Tungsten carbide saw blade for cutting solid wood 

1/ GENERAL INTRODUCTION:
Industrial Range

Industrial Range Tungsten Carbide Tipped saw blades are precision manufactured to the highest standards for accuracy and durability. Incorporating heavy gauge, hardened, tempered, ground, smithed and blocked saw bodies, with industrial grade tungsten carbide saw tips.

Industrial saw blades fall into four general catagories, Rip, General Purpose, Crosscut, and Fine or Trimming.

Rip blades have large gullet space for chip clearance and rapid cutting with the grain.

General Purpose blades provide a good finish and can be used for finer ripping or rough crosscutting.

Crosscut blades have more teeth and are used for cutting across the grain.

Fine or Trimming blades have as many teeth as possible to provide a good clean finish for accurate sizing and trimming of timber and various materials like plywood and particle boards.

Non Ferrous

There are two types of Non Ferrous Tungsten Carbide Tipped saw blade.

Non Ferrous Section blades are for cutting hollow and solid sections of aluminium and other non ferrous materials.

Non Ferrous Extrusion blades are for cutting thin walled extrusions of aluminium and plastics, and are normally with a negative tooth angle.

Negative Rake

Negative Rake Tungsten Carbide Tipped saw blades are specially designed with a negative tooth angle for cutting across the grain and trimming with radial arm and pull over saws, and for cutting mitres

Tungsten carbide strips for cutting tools

We have a large stock and complete specifications.And can also produce the goods according to your requirements.

Following are some description of our strips :

1.Useage: for wearable parts
2.Package: seaworthy
3lievery time:15 days
4.Favorable price
5.ISO9001:2000Certificate
6.Sintered in HIP Furnace
7.Good precistion
8.Material in Fine Grain Size
9.Exported to 12 countries...

Welcome your inquiry and look forward to our cooperation.

Cemented carbide strips are  usually used for general wood cutters / hard wood cutters ,plastic and tobacco cutting . and  meet the ISO9001:2000 quanlity standard.  We can make  the shipment in the shortest delivery time wtih the compeititve price than any other factory.

We can manufacture various cemented carbide stipes and plate as per customer's requirments based on the differente markets. Our main products include :Cemented carbide  drills, cutting cutters, mining tools, drawing dies ,carbide stripes ,rods etc.

Skillful workers and advanced euquipments can make every of your size possible.

Different grade are available too.

We take great  efforts to increase commodity types rather than quantitiy to promote the flexibility of competing in the worldmarket. Above all , our client;s demands are always the first to be considered.

Regular Specification:

Width:  3-16, 18, 20, 22, 25, 28, 30, 32, 35, 40, 70 mm

Thickness: 1.5-6 mm

Length: 310 mm( we can cut it to different length as required)

 GENERAL INTRODUCTION:

Zhuzhou UKO cemented carbide co., ltd. Is contribute to manufacture and sale kinds of tungsten carbide mould, precision tools and blanks, the main products are tungsten carbide ring and rollers, strips, blade, drawing dies , heading dies, rods, precision tools and etc, we own advanced level equipments, such as deoxidization furnace controlled by computer, high temperature Molybdenum carbide furnace, automatic-press sintering furnace,  slow-feeding NC wire-cut machine, precision EDM shaping machine, CNC Machining Center and quality test equipment.

Our company gathered the professional stuff in the area of tungsten carbide design, produce and sales, we could offer an excellent service to the clients.

We had exported our products to more than 20 countries in North America, Europe and South-east Asia. The products had passed the ISO9001-2000 quality system certificate.

We could offer high quality products and excellent service based on the advanced quality control system, good management, market investigate research and service insurance.