Search    Home | Register | Login | Join | Trade | Forum | Cart


  < Back

     SMS Construction Machinery Industry and Trade Co., Ltd. 

     About this company : SMS is the gereral distributor of Utiform and Encomat firms in Turkey and Middle Asia Turki Republics. SMS continuously improve its invesments at the same time carries its domestic achievements to abroad. Nowadays it predominantly exports to Middle East and Middle Asia Turki Republics, therefore increases its external marketing allocation. SMS has been presenting its world wide trade marks to Turkish marketing for over ten years, thus brings different dimension in competition. SMS cares about spare part and service applications after selling so presents economic and exact solutions to you-our business partners. SMS follows up the innovations in construction sector, continues to fetch the world’s most quality trade marks in economical prices.

     Contact : Sibel Ozkan, Sales Consultant 
     Headquarters : Ivogsan 668. Sokak No:52, Ostim, Ankara, 06370, Turkey
     Phone : 0090-312-394-1476, Fax : 0090-312-394-1475 
     Website : Log on to trade instantly , Email : Log on to trade instantly

     Personel and Material Hoist Personel and Material Hoist Encomat - Iza Pax 12- Iza Pax 16

They are used in carrying of personnel and material upstairs by their completely covered cabins. You can reach each floor by setting call up button and guard door (optional). There are diaphone communication system, warning lamp and control panel. Safety is in high level with centrifuge system and urgent stop buton.
  > Add to cart


     Climbing Work Platform Climbing Work Platform Iza 30-100 Single Mast

The IZA 30/100 work platform arise and descend on metalic platforms by electrical motor power. It enables work in all facade applies,such as maintenance, glass, aluminium, granite plating, jacketing of concrete, painting, plastering, both for new works and rehabilitation of older constructions. It provides high job safety, thrift of time and labour, efficiency and cost effective working. It can be used in maximum 10 m platform length and 150 m height by standard anchorage. Special anchorage systems are used for more than 150 m heights. Principal Safety Systems: • Possibility of centrifugal brake. • Twin motors fitted with brakes. • Automatic platform levelling system. • Emergency stop. • End-of-travel to limit the final masts. • End of mast detector. • Manual descent in case of emergency. • Final mast section with half rack. • Galvanised non-slip floors. • Acoustic maneuvering warning SINGLE MAST SYSTEM Maximum Height: 150 m. Maximum Width: 10 m. Width of Platform: 1360 mm. Max. Width with extensions: 2260 mm. Electrical Characteristics: Speed: 7m / min. Motor Power 2 x 2 2 kW Electrical Voltage: 380 V. Power Consumption: 12 A. Starting Current 56 A. Mast Section: Dimensions: 1489 x 525 x 525 mm. Weight: 63 Kg. Rack module: 6 m. Platform Section: Dimensions: 1500 x 1360 x 870 mm. Weight: 75 Kg. Weight (with floors and guard rails) 125 Kg. Length of the extensions: 900 mm
  > Add to cart


     Climbing Work Platform Climbing Work Platform 30-100 Twin Mast

30/100 TWIN MAST The IZA 30/100 work platform arise and descend on metalic platforms by electrical motor power. It enables work in all facade applies,such as maintenance, glass, aluminium, granite plating, jacketing of concrete, painting, plastering, both for new works and rehabilitation of older constructions. It provides high job safety, thrift of time and labour, efficiency and cost effective working. It can be used in maximum 35 m platform length and 150 m height by standard anchorage. Special anchorage systems are used for more than 150 m heights. Principal Safety Systems: • Possibility of centrifugal brake. • Twin motors fitted with brakes. • Automatic platform levelling system. • Emergency stop. • End-of-travel to limit the final masts. • End of mast detector. • Manual descent in case of emergency. • Final mast section with half rack. • Galvanised non-slip floors. • Acoustic maneuvering warning TWIN MAST SYSTEM Maximum Height: 150 m. Maximum Width: 35 m. Width of Platform: 1360 mm. Max. Width with extensions: 2260 mm. Electrical Characteristics: Speed: 7m / min. Motor Power 4 x 2 2 kW Electrical Voltage: 380 V. Power Consumption: 24 A. Starting Current 112 A. Mast Section: Dimensions: 1489 x 525 x 525 mm. Weight: 63 Kg. Rack module: 6 m. Platform Section: Dimensions: 1500 x 1360 x 870 mm. Weight: 75 Kg. Weight (with floors and guard rails) 125 Kg. Length of the extensions: 900 mm
  > Add to cart


     Continuous Mixer Continuous Mixer Utiform- Utimix C 40

Price: 3000 Euro Characteristics: • There are two models; single phase and three phase. • Mixes all sorts of premixed mortars (masonry mortar, renders etc...) • The mixing shaft transports the material to the mixing tube, where the material is mixed with water, which is dosified with a flow meter. • Complete separation of dry and wet material. • Electric control box is sealed to avoid damage from water or dust. • The water dosifying system is installed in the machine. • Can be used in combination with mixing pumps and mortar pumps. • The hopper capacity is 75 l. Advantages: • Easy to take apart for easy transport. • Easy to use and low maintenance. • Low filling height of 100 cm and large hopper capacity of 75 l. Standard equipment: • Flow meter 1000 l/min • Water pump. • Cleaning tools. • Warranty certificate. • CE certificate. • Instruction manual and parts book.
  > Add to cart


     Convey HD 5 Floor Screeding Pump Convey HD 5 Floor Screeding Pump UTIFORM

Characteristics: • 2011 Deutz. Motor suiting latest norms. 34 KW with speed control 2000-2850 RPM. • Modern compressor activation by gearbox, free, optimal coupling between motor and compressor • Double exhaust (silent work) • Chassis with special powder coating for protection • Direct mixer activation with a special 3 groove belt • Mixer stop • Automatic separation of condensed water in air system. No freezing and less corrosion. • Trailer hook with inertia brake adjustable in height • Ball hook or DIN according to order • Adjustable jockey wheel (heavy model) • 1.950 kg robust axel • TάV Certified vessel Tripod support Towable • Certified for transport • CE Certified • Tool set Standard Equipments: • 2 x 20 m hose 65 mm. • 2 support feet on back • Vehicle connector lightened buffer • Tool set. • Tripod SPARE PARTS: 1. Grill safety system 2. Safety valve 3. Low filling height 4. Comminution with remote control 5. Application of all filling types 6. Voice proof case 7. Loading of the mortar can be done manually or by ladle. 8. Automatical greasing system
  > Add to cart


     Dry Type Shotcrete Machine Dry Type Shotcrete Machine Utiform - Piccola & GM

Characteristics: • Modern gunite system. • Water is added in Spray gun. • Suitable for all gunite works in swimming pools, tunnels and mining. Standard equipment: Characteristics: • Most efficient dry guinite system • Warranty Certificate. • CE Certificate. • Parts book and Manual. Recommended equipment (By order): • 40 m. of 50 x 70 conveying hose with couplings. • 25 m. of 5 x 2,5 mm2 electrical cable • Spray gun. 1. Spare parts: 2. Loading height 3. Easy adjusting 4. Electrical vibrator 5. Electronic control panel complies with EU Directive 73/23
  > Add to cart


     Material Hoist Material Hoist Iza - 750

IZA 750 Encomat is an interior and exterior side hoist which can be used in plastering, painting, jacketing of concrete works and carrying materials upstairs. In your busy construction use. You can use for loading and unloading of materials, you can make it it the ideal replacement in many cases for derrick cranes. Easy to assemble and dismantle. Maximum Load 750 kg Maximum Height 150 m Speed 24 m/min Cage Dimensions 1550 x 1070 mm Power of Motors 1x 5.5kW Voltage 220-380 V Maximum Lifting Height 6m Length of Each Mast Section 1,5 m Maximum Current 18x7-11 A
  > Add to cart


     Mixer Mixer Utiform - Utimix P 120

Price: 3300 Euro UTIMIX P120 Mixer Characteristics: The UTIMIX P120, as its name suggest, has a full 120-litre capacity. It can be easily cleaned, a feature that makes it essential for any work involving thixotropics or other materials used for refurbishment such as screed or Tops. This mixer can safely be used for mixing products ranging from traditional or mixed mortars to those in the top of the range or with a composition that requires more careful mixing. Advantages: • 120 litre drum (large capacity for mixing homogenous amounts). • Water can be added by means of an easy-to-use valve on the barrel itselft. • Grill lid on the top, with an automatic stop switch, as well as a safe gap between the mixing blades and the operator's fingers or hands. • The high technology reduction engine and low power consumption means it can be used even on building sites werem due to the size, there is not a lot of power available. This in turn makes it a efficient and versatile tool for all professionals who strive to provide constant and maximum quality.
  > Add to cart


     Personel and Material Hoist Personel and Material Hoist Iza 750- Iza 1500 Hoists (With Roof)

Encomat IZA 750 and 1500 with roof are used for carrying material and personnel. The roof system mounted on the top of them has been used in order to protect from external effects. It works on Kramer cogwheel mechanism by high safety. You can stop on each floor whichever you want by adjusting floor stop mechanism of electric control panel. • Floor selector with no limitation on their number. • End-of-travel on all the cabin doors. • Overload detector • Electronic mast detector. • Redundant upper and lower end-of-travel. • Motors fitted with brakes with manual release. • Manual / automatic selector: choice of operating mode according to the needs of each job. • Acoustic maneuvering warning. • Emergency stop. IZA 750 IZA 1500 Maximum Load 750 kg 1500 kg Maximum Height 150 m 150 m Speed 24m/min 20m/min Cage Dimensions 1550x1070 mm 2010x1750 mm Roof Height 2020 mm 2020 mm Power of Motors 1x 5.5kW 2x 6.2kW Voltage 380 V 380 V Maximum Lifting Height 6m 6m Length of Each Mast Section 1,5 m 1,5 m Maximum Current 18x7/11 A 20/10 A
  > Add to cart


     Ready Plaster and Gpysum Machine Ready Plaster and Gpysum Machine Utiform - Mini

Price: 4900 Euro Characteristics: • Mixing and spraying pump for premixed material for interior and exterior applications. • Machine is filled with drymix materials. • The installed water dosing system guarantees a continous mix of the material. • The machine stops automatically if the water pressure is insufficient. • Homogenous and continous mix guaranteed by flowmeter and water pump. Advantages: • Easy transport. The machine can be taken to parts within minutes. • Compact and robust. • Maximum power due to special electric control box. • Low filling height. • Easy to use and maintain. • Fast and easy cleaning. • Chassis based on 4 Wheels for easy transport on construction site. Standard equipment: • Air compressor 170 l/min. • Cleaning tools. • Tool kit (cleaning balls and spanners) • Mixing shaft. • Water pump 230V 50 Hz. • CE Certificate. • Parts book and instruction manual. • Spray gun. • Stator + Rotor • 10 m. of 25 mm. product hose • 10 m. of 3/8" air hose • 25 m. of 3 x 2.5 mm2 electrical cable. Spare Parts: 1. Chasis 2. Electronic control panel complies with EU Directive 73/23 on low-voltage electrical equipment 3. Usable in small spaces 4. Applies plaster 5. Air compressor
  > Add to cart


     Ready Plaster and Gpysum Pump Ready Plaster and Gpysum Pump Utiform- Quattro

Characteristics: • Mixing pump for premixed material with large hopper capacity. • Simple and robust. • Mixing tube can be inclined without loss of dry material to change stator and rotor. • Machine can be filled with premixed material from bags or from silos. • The worm pump transports the material through hoses to the spraygun where it is sprayed on the surface with compressed air. • In case of unsufficient water pressure the electric control stops the machine. • The electric control box is sealed to avoid damage from dust or water. Advantages: • Fits through all standard doors. 660 mm wide. Narrowest machine on the market. • Machine can be taken in to parts within minutes for easy transport. • Can be carried in small vehicle when taken to parts. • Equipped with 4 wheels makes transport on construction site easy. • Easy to work and maintain. Standard equipment: • Automatic stopping system. • Compressor 250 l/min. • Water pump. • Tool Kit. • Spray gun. • Mixing shaft. • Cleaning tools. • Warranty Certificate. • CE Certificate. • Parts book and manual. • Stator / Self-adjusting rotor. • 10 m. of Dn 25 mm. product hose with coupling. • 10 m. of 3/8" air hose with coupling. • 5 m. 3/4" water hose + intake valve. • 25 m. of 5 x 2.5 mm2 electrical cable Spare Parts: 1. Stator fixing system 2. Mixing tube safety system 3. Low loading height 4. Transport handles 5. Disassembling and loading onto a vehicle takes just a few minutes.
  > Add to cart


     Ready Plaster and Gpysum Pump Ready Plaster and Gpysum Pump Utiform - Master

Characteristics: • Three phase mixing pump for interior and exterior coatings (gypsum, mortar, render) • Simple and robust. • Can be filled with premixed material from bags or from silos. • Horizontal material feeding, avoiding desagregation of materials. • The pump transports the mix through hoses to the spray gun, where with help of compressed air, the material is sprayed on the surface. • Cylindrical mixing tube with "guillotine" closing system. • Special designed electric box with automatic shut off system for pump and compressor. • Holders for accesories and tools. • In case of loss of water pressure the machine is switched off automatically. • Sealed electric box to avoid damage by dust or water. • The correct turning direction is guaranteed by a two direction switch on the electric board. • Perfect water dosification and regulation with flow meter to guarantee continous mix. Advantages: • Easy to use due to ergonomic design. • Easy to clean and maintain. • For easy transportation between floors on site the machine can be taken to parts within minutes. • Big toolbox for tools. • Machine with 4 wheels for easy transport on site. • Low filling height. Standard equipment: • Automatic shut off system. • Compressor 250 l/min. • Water Pump. • Tool and Cleaning Kit (monkey wrench) • Stator / Rotor. • 10 m mortar hose Dn 25 mm. • 10 m air hose 3/8" • 5 m water hose 3/4" + suction valve • 25 m electric cable 5x2'5 mm2 Spare parts: 1.Cleaning tools located on machine's chassis. 2. water flow regulation valve 3. Opening of mixing tube with material door closure activated by easily accessible latch. 4. Machine's safety system for opening of mixing tube and main motor.
  > Add to cart


     Shotcrete Machine - Electrical  Shotcrete Machine - Electrical Utiform

V1 Characteristics: • 120 l hopper with low filling height. • Robust and low maintenance costs. • Three phase motor with protection hood. • Remote control. • Forward - BackWard - Drive. • Big cleaning hole. • Easy to use and to easy to transport. Standard equipment: • 2 Speed gearbox. • Vibrator (option) • Vibrator connection. • 2 x 20 m mortar hose 50 mm. • 25 m electric cable. • CE certificate. • Warranty certificate. • Cleaning tools. • Instruction manual and parts book.
  > Add to cart


     V 2 Rendering Machine- Diesel V 2 Rendering Machine- Diesel Utiform

Characteristics: • Rendering machine for one coat render, traditional mortar and all sorts of premixed mortar. • Ideal for cement based renders, one coat renders, repair mortars and traditional mortars. • Forward - BackWard drive of the pump for easy cleaning and avoid material blockages. • Large radiator with cooling unit to avoid heating of the motor and hidraulics. • Three cylinder 21 HP water cooled engine for best performance even in dificult circumstances. Low noise level and low consumption. • The pneumatic remote control at the spray gun, that stops the pump and lowers the revolutions of the motor makes the machine even more confortable. • Max. grain size 6mm. • Equipped with stator and rotor 2L6 with an output up to 3,6 m3/h. • Can be used for small quantities of self levelling floor material. • Excellent towing performance due to low gravity point. • The serial remote control allows to start and stop the machine from any point during the working process. • Uniform spray due to 375 l/min two cylinder compressor. Standard equipment: • Towable. • Air compressor 375 I/6 bar. • Stator + Rotor. • Electric control panel. • Tools and cleaning kit. • Warranty certificate. • CE certificate. • Instructions manual and partsbook. • 2 x 15 m mortar hose 35 mm • 1 x 5 m mortar hose 25 mm • 1 x 15 m air hose. • Spray gun. Spare Parts: 1. Water engine cooled diesel motor 2. Mixer with safety system 3. Can be towed. (<750 kg) 4. Hopper grill with safety system 5. Electric panel and controls integrated in machine 6. Cleaning hole
  > Add to cart


     Vario Rendering Pump- Electrical Vario Rendering Pump- Electrical UTIFORM

Characteristics: • Electric mortar pump. • For the continous pumping of material up to 6 mm grain size. • Robust and easy maintenance. • High performance stator / rotor pump. • Maintenance free motor and gearbox (380 V/50 Hz). • Material hopper with 80 liters capacity and low filling height. • Chassis mounted on 2 wheels for easy transport. • For special application with options of pneumatic or electric remote control system. • High performance mortar pumpt for pumping, spraying and injecting all sorts of mortars. Advantages: • Simple and robust. • Easy to use. • Multiple applications. Standard equipment: • Chassis with protection hood for motor. • Hopper with grill (incl. safety system) • Motor and gearbox. • Stator + Rotor. • Material outlet 50 mm. • Electric control box. 3P+N+T 32 A/6h, plug for mixers, compressor and forward - backWard switch. • Tool kit and cleaning tools. • Warranty certificate. • CE certificate. • Instructions manual and parts book. • 25m electric cable 5 x 2,5 mm2 • Spray gun. • 2 x 15 m mortar hose 35 mm. • 2 x 15 m air hose. • Spraying kit. Spare parts: 1. With vibrating sieve on hopper 2. With planetary mixer incorporated 3. Variator version 4. Version that can be towed certified for road transport 5. Ultimix C-40 Towable Version All the time you must use original tools and spare parts. Owing to the continually amendment and improving works the equipment can be maintaned without pre declaration.
  > Add to cart


Page 1 of 1
  ^ Back to top

   Bookmark and Share



About Us | Register | Login | Join | Trade | Forum | Cart |  Join  |  Connect  |  Follow
Know-How | Trading Precaution | Phishing Alerts | SOAOnDemand! | VAR 360 | RSS Feed 

  Copyright © 2024 MarginUp All Rights Reserved.
MarginUp User Agreement and Privacy Policy.