|
|
| < Back | ||||||
| Luo Electrical | ||||||
| About this company : We are in the position supply mini circuit breakers, residual current circuit breakers, moulded case circuit breaker, A/C contactors, thermal relays, magnetic starters, pushbutton switches, meters, fuse, voltage regulators, voltage stablizers, UPS, sockets, plugs, lighting, etc. | ||||||
| Contact : Chao Luo | ||||||
| Headquarters : Huang Qi Jia, Yueqing, Liushi, Zhejiang, 325604, China | ||||||
| Phone : 0086 130 34230163, Fax : 00852 301 407 46 | ||||||
| Website : Log on to trade instantly , Email : Log on to trade instantly | ||||||
 | AC Contactor LCJX1 LCJX1-D09-95 LCJX1-D09~95 series AC Contactor is suitable for using in the circuits up to the rated voltage 660V AC 50Hz or 60Hz, rated current up to 95A, for making, breaking, frequently starting & controlling the AC motorbined with the auxiliary contact block, timer delay & machine-interlocking device etc, it becomes the delay contactor, mechanical interlocking contactor, star-delta starter. With the thermal relay, it is combined into the electromagnetic starter. The Contactor is produced according to IEC947-2,VDE0660 & BS5452. | |||||
| > Add to cart | ||||||
 | Earth Leakage Circuit Breaker DZ47Le DZ47LE (DZ47+DZ47L) earth leakage circuit breaker(ELCB) is used for the protection,against electrical leakage in the circuit of 50Hz or 60Hz,rated voltage single-phase 240V, 3 phase 415V,rated current up to 60A. When somebody gets an electric shock or the residual current of the circuit exceeds the fixed value, the ELCB can cut off the power within the time of 0.1s automatically protecting the personal safety and preventing the equipment from the fault resulted by the residual current. With this function, the ELCB can protect the circuit against over load and shortcircuit or can be used for the unfrequent switchover of the circuit under normal conditions. It conforms to IEC898-87 & IEC755. | |||||
| > Add to cart | ||||||
.jpg) | Mini Circuit Breaker (MCB) LB7 (L7) LB7 MCB WITH CB TEST CERTIFICATE They have protective function as shortage as overload, and are used in lighting distribution system in industy, commerce and dwelling, and protect fractional electric motors. And they also have many merits of high protective grade(up to IP20), high break capacity, reliable sensitive action, convenient, multipole assembing, long life etc. They are mainly adapted to the circuit of AC 50Hz, 230V in single pole, 400V in double, three, four poles for protecting overload and short circuit. Meanwhile, they are also used in turning on or off the electric apparatus and lighting circuit under the normal condition. | |||||
| > Add to cart | ||||||
 | Mini Circuit Breaker DZ47-63 DZ47-63 DZ47-63 series mini circuit breaker is used in lighting distribution system or motor distribution system for protecting overload and hort-circuit in the system. The product is novel in structure, light in weight, reliable and excellent in performance. It has high breaking capacity, can trip quickly and its installation uses with guide. Its case and items are adopted by high fire-resistant and shockproof plastics. The product, with long life, is mainly used in AC 50Hz/60Hz single-pole 240V or two, three, four-pole 415V circuit for overload and short-circuit protection as well as for unfrequent on-and-off switching electric equipment and lighting circuit in normal case.The products comply with IEC 898 & BS 3871. | |||||
| > Add to cart | ||||||
 | Moulded Case Circuit Breaker LM1 LM1 1. Usage LM1 Series Moulded Case Circuit Breakers are suitable for turn-on or turn-off not frequently and starting a motor not frequently in the circuit of AC50Hz, rated insulation voltage 800V(500V for LM1-63),rated working voltage 690V and below, rated working current up to 800A. The breakers have overload, short-circuit and under voltage protection function, so as to protect the circuit and the power equipment against damage. The breakers, according to the rated ultimate short circuit breaking capacity (Icu), could be classified four kinds of types C(basic type), L(typical type), M (second high breaking type) and H (high breaking type).The breakers could be installed vertically or horizontally. The breakers are of the following features: compact size, high breaking capacity, short arc-over distance(some of the zero arc-over distance), isolating function and shakeproof. They also passed the tests of nuclear industry condition(1E grade) and ship condition, become the only product being used in nuclear industry base among the same products made in the country, furthermore become the ideal products applied on land or ships. 2. Applied Standard The breakers conforms to IEC60947-2(1995) and GB14048.2. 3. Applied Environment Elevation is not more than 2000m and the maximum gradient is 22.5 ?.Ambient temperature is between -5 ?? and +40 ??(+45 ?? for ships). Be able to bear the influence of moisture in the air, salt fog, mould fungus and nuclear radiation. Be able to work reliably under the condition of normal vibration on ship. Be able to work reliably when earthquake (4g) occurs. There must be no any explosive medium, and there must be no any gas which would corrode metal or any conductive dust which would destroy the insulation. The place would not be invaded by rain and snow. | |||||
| > Add to cart | ||||||
 | Moulded Case Circuit Breaker LM2 LM2 LM2(NS) series moulded case circuit breaker is one of new type breakers which this company adopts international advanced design, manufacture technology to develop, The rated insulating voltage is 950V, Suitable for AC 50Hz(60Hz), rated working voltage 690V or below, rated working current is 12.5 to 630A of circuit. and use in distributing electric energy. Non-frequent making and breaking in the normal conditions and protecting when circuit and installation are overload, short circuit and lacking voltage. Rated shell-rack and the breaker which current is under 400A.take protect effect when mousecage motor's non-frequent start,breaking off working and protecting overload, short circuit and lacking voltage. The product confirms to GB14048.2, IEC60947-2 standards. | |||||
| > Add to cart | ||||||
 | Moulded Case Circuit Breaker LM3 LM3 LM3 series moulded case circuit breakers (here in after referred to as MCCBS) are the new series MCCBS developed to international standards. The MCCBS having rated insulation voltage 400V (lnm≤160A) to 690A (lnm≥250A) are designed to be used for distribution network having rated current 10A to 1600A,rated operational voltage 380/400V to 660/690V,intended for power distribution,protection of electrical equipment and circuits against overload,short-circuit and under voltage,and also for unfrequent switching of electric circuit under normal conditions. The MCCBS with frame rating up to and including 400A can be used for unfrequent starting,and interruption of squirrel cage motors,and for protection of motors against overload,short-circuit and under voltage. LM3 series circuit breakers can be equipped with electrical accessories and mechanical accessories,such as under voltage release,shunt release,auxiliary contacts,alarm contacts,electric operating mechanism and rotary mechanical operating handle etc. LM3 series residual current operating circuit breakers other than above mentioned functions are designed available also for protection of person and equipment not only against electric shock,but also against risks of fires originated by insulation failures of equipment. | |||||
| > Add to cart | ||||||
 | New Type AC Contactor LCJX1 LCJX1-D09~95N LCJX1-D09~95N (New LC1-D) series AC Contactor is suitable for using in the circuits up to rated voltage 660V AC 50Hz/60Hz,rated current up to 630A,for making,breaking,frequently starting&controlling AC motors. | |||||
| > Add to cart | ||||||
 | New Type Mini Circuit Breaker LB2 The latest designed LMCB1 series circuit breakers, neoteric in structure, light in weight, reliable & excllent in performance, are mainly applied to the AC 50Hz/60Hz circuit with rated voltage 230V/400V, rated current up to 63A, providing circuits of modern buildings with overload and short circuit protections. And they are also suitable for operating and isolating the circuit infrequently. The products comply with EN60898(IEC60898) & BS3871. | |||||
| > Add to cart | ||||||
 | Residual Current Circuit Breaker (RCBO) LB7R LB7R series residual current circuit breakers, neoteric in structure, light in weight, reliable and excellent in performance, are the latest designed for human indirect contact protection and overcurrent protection in the circuit of 50Hz/60Hz, rated voltage 230/400V, rated current up to 63A, or similar circuits in buildings and also for fire protection from continuous earthing fault due to no operation of overcurrent protection apparatus. The breakers with overvoltage protection are also designed for voltage increasing protection due to power network fault. Environmental factors are considered in the design of the circuit breaker by taking many recoverable and degradable materials. And they comply with EU RoHS Directive as well as IEC61009-1 Residual current circuit breaker with integral protection for household and similar uses(RCBO). | |||||
| > Add to cart | ||||||
| 1 |
| Page 1 of 1 |
|
|
Know-How | Trading Precaution | Phishing Alerts | SOAOnDemand! | VAR 360 | RSS Feed | ||
| Copyright © 2024 MarginUp All Rights Reserved. MarginUp User Agreement and Privacy Policy. |
||